Super User
Fireproof Multi Purpose Hose
Fireproof/Multi Purpose Hose
Service Fuel/Liquid Mud/Deepwell/Firemain and Deluge Suction & Discharge 250 and 400 PSI WP
Application:
Transfer of fuel/liquid mud/deepwell/firemain and deluge
Compatible with 60% aromatics content
ID | OD | MBR | WP* | Weight |
(inches) | (inches) | (inches) |
| (lbs/ft) |
2 | 3.2 | 12 | 200/400 | 3.3 |
3 | 4.3 | 18 | 200/400 | 4.5 |
4 | 5.3 | 24 | 200/400 | 6.0 |
5 | 6.5 | 30 | 200/400 | 7.3 |
6 | 8.1 | 42 | 200/400 | 13.6 |
8 | 10.1 | 48 | 200/400 | 18.6 |
10 | 12.2 | 54 | 200/400 | 25.8 |
12 | 14.7 | 66 | 200/400 | 35.4 |
Fuel Discharge Hose
Fuel Discharge Hose
Loading/Deck Hose | Service Fuel/Oil/Oil Base Mud Discharge 250 PSI WP*
Application: Transfer of fuel/oil/oil base mud Compatible with 60% aromatics content
Hose Construction:
Tube: black oil resistant Buna N good for 60% aromatic content
Reinforcement: multiple plies of synthetic textile
Cover: tan, oil abrasion and ozone resistant
ID (inches) | OD (inches) | MBR (inches) | WP* | Weight (lbs/ft) |
2 | 2.9 | 12 | 250 | 1.7 |
3 | 3.8 | 18 | 250 | 2.3 |
4 | 4.8 | 24 | 250 | 3.0 |
5 | 6.0 | 30 | 250 | 4.7 |
6 | 7.1 | 36 | 200 | 5.9 |
8 | 9.4 | 48 | 100 | 10.9 |
Fuel Transfer Hose
Fuel Transfer Hose
Loading/Deck Hose | Service Fuel/Oil/Oil Base Mud Suction & Discharge 250 PSI WP*
Application: Transfer of fuel/oil/oil base mud Compatible with 60% aromatics content
Hose Construction:
Tube: black oil resistant Buna N good for 60% aromatic content
Reinforcement: multiple plies of synthetic textile and helix
Cover: tan, oil abrasion and ozone resistant
ID(inches) | OD(inches) | MBR(inches) | WP* | Weight (lbs/ft) |
2 | 2.9 | 12 | 250 | 2.1 |
2.5 | 3.4 | 18 | 250 | 2.5 |
3 | 3.9 | 18 | 250 | 2.9 |
4 | 5.2 | 24 | 250 | 4.2 |
5 | 6.3 | 30 | 250 | 5.9 |
6 | 7.5 | 36 | 200 | 8.1 |
8 | 9.4 | 48 | 100 | 10.9 |
10 | 11.5 | 74 | 100 | 12 |
12 | 13.5 | 78 | 100 | 14 |
Steam Pile Driver Hose
Steam Pile Driver Hose
The basic design of this hose, with a few modifications, is our Choke & Kill hose construction
Flexible connection between the steam hammer and the power unit
This pile driver hose is designed to give long service life, and prevent any rubber particles from getting into the driving hammer
Hose Construction:
Inner Lining: spiral strip-wound stainless steel, with a heat-insulating ply over the strip-wound stainless steel liner
Second Lining: synthetic rubber compound rated to 450°F
Reinforcement: four spiral braids of copper-coated high strength wire for the main reinforcement. (same high strength wire used in our Choke & Kill hose)
Cover: neoprene covers bonded to carcass with breaker strip
Built-in API connections
ID(inches) | Max Length (feet) | MBR(inches) | WP* (PSI) | TP* (PSI) | Weight (lbs/ft) | Temp Range (°F) |
4 | 200 | 48 | 400 | 600 | 21 | 450° |
6 | 200 | 60 | 400 | 600 | 26 | 450° |
Hydraulic Pile Driver Hose
Hydraulic Pile Driver Hose
The basic design of this hose is from our oilfield Choke & Kill hose construction, with a few modifications to adapt it for the purpose of driving pilings offshore.
Designed to operate with the large hydraulic hammers that are in service today
Flexible, and delivers performance in excess of the demands for pressure, pulsations, abrasion, vacuum, and heat resistance, when driving pilings
Hose Construction:
Inner Lining: spiral strip-wound stainless steel
Second Lining: high quality Buna “N” oil resistant compound and special spirals of synthetic materials above the second lining help to protect against deformation and cut down on vibration
Reinforcement: four spirals of copper-coated high– strength wire, same as used in our Choke & Kill hose – see page two for diagram
Cover: neoprene cover bonded to carcass with nylon breaker strip
ID (inches) | OD (inches) | MBR (inches) | WP* (PSI) | TP* (PSI) | Weight (lbs/ft) |
4 | 200 | 48 | 6,000 | 9,000 | 47 |
Built-in API fittings
Multi-Purpose Heavy Duty Oilfield Service Hose
Multi-Purpose Heavy Duty Oilfield Service Hose
Designed for service as discharge hose for reverse circulations, acidizer/cement service solution equipment, mud tank jetting, instrument blow down service, and rotary/vibrator service on portable drilling units, workover rigs and seismograph equipment.
Exceeds requirements of API 7K for minimum safety factor: 2½ to 1 burst pressure.
Hose Construction:
Tube: black neoprene, high-grade
Reinforcement: multiple spiral plies of special high tensile steel wire, each separated by a rubber layer
Cover: MSHA accepted oil, weather and abrasion-resistant red synthetic rubber cover/ Synthetic outer cover added for abrasion resistance
Optional: stainless steel outer protective armor available
Working Temperature: -40°F to +250°F (-40° to +121°C)
H2S suitable with terminating connections meeting requirements of MR-01-75, latest edition
ID (inches) | OD (inches) | MBR (inches) | Wire Layers | WP* (PSI) | Min Burst (PSI) | Weight (lbs/ft) |
2 | 3 | 25 | 6 | 5,000 | 20,000 | 6 |
Also available with 7500 PSI WP – Spec 2 WEO 168
Stainless Steel Lined Flexible Flow Lines
Stainless Steel Lined Flexible Flow Lines
H2S and Co2 compatible A premium quality, extremely flexible hose, available with stainless steel or high grade neoprene outer covers. An ideal hose for oil and gas gathering, test, lines, injection lines, hydraulic control lines, acidizing lines, production lines, or risers to floating or fixed surface facilities
Continuous stainless steel liner/Other type end fittings available
Fire Resistance:
An independent, lab-conducted fire test showed that while under constant pressure of 15,000 PSI, with 700°C flame directed on the end fitting and hose proper, the hose developed a slight leak at the coupling after 28 minutes of exposure.
ID (inches) | OD (inches) | MBR (inches) | Working Pressure (PSI) | Test Pressure (PSI) | Built-in Couplings | ||
API | Integral | Flanges | |||||
2 | 4.4 | 30 | 5,000 | 10,000 | | | |
2.5 | 4.9 | 30 | 5,000 | 10,000 | | | |
3 | 5.8 | 36 | 5,000 | 10,000 | | | |
3.5 | 5.9 | 36 | 5,000 | 10,000 | | | |
4 | 6.3 | 36 | 5,000 | 10,000 | | | |
5 | 8.3 | 48 | 5,000 | 10,000 | | | |
6 | 9.3 | 48 | 5,000 | 10,000 | | | |
2 | 4.5 | 30 | 10,000 | 15,000 | | | |
2.5 | 5.0 | 30 | 10,000 | 15,000 | | | |
3 | 6.0 | 36 | 10,000 | 15,000 | | | |
3.5 | 6.9 | 36 | 10,000 | 15,000 | | | |
4 | 7.9 | 36 | 10,000 | 15,000 | | | |
5 | 8.9 | 48 | 10,000 | 15,000 | | | |
2 | 5.1 | 36 | 15,000 | 22,500 | | | |
2.5 | 5.9 | 36 | 15,000 | 22,500 | | | |
3 | 6.9 | 36 | 15,000 | 22,500 | | | |
Diverter Hose
Diverter Hose
Application: Diverter system to control shallow pocket blowouts.
Hose Construction:
Tube: black, oil resistant Buna N
Reinforcement: multiple plies of synthetic textile and high tensile spiral wire, same as our Choke & Kill hose
Cover: black, oil, abrasion and ozone resistant
ID(inches) | OD(inches) | MBR(inches) | WP* (PSI) | Weight (lbs/100 ft) |
4 | 5.2 | 36 | 2,000 | 800 |
5 | 6.5 | 36 | 2,000 | 1,000 |
6 | 7.5 | 36 | 2,000 | 1,200 |
8 | 9.6 | 48 | 1,500 | 2,200 |
10 | 11.8 | 64 | 1,200 | 3,100 |
12 | 14.0 | 80 | 1,000 | 4,000 |
BOP Control Hose
BOP Control Hose
Hose Construction:
Tube: black, oil resistant synthetic rubber
Reinforcement: multiple plies of synthetic textile and high tensile spiral wire
Cover: multiple layers of fire retardant material with a stainless steel outer jacket
Fittings: Hose comes standard with 1” SS316 male connections with long threads to accept miscellaneous threaded connectors. Also available with other fittings to match customers’ requirements.
I.D(mm) | O.D(mm) | W.P(MPA) | B.P(MPA) | Min. Bending Radius(MM) | Thread | Working Time with Fire-Resistance at 750C | |
Normal | Limit | ||||||
6.3 | 25 | 35 | 105 | 132 | NPT,LP | 5 | 25 |
27 | 70 | 175 | |||||
8 | 29 | 35 | 105 | 142 | |||
33 | 70 | 175 | |||||
10 | 31 | 35 | 105 | 162 | |||
35 | 70 | 175 | |||||
12.5 | 38 | 35 | 105 | 212 | |||
44 | 70 | 175 | |||||
16 | 42 | 35 | 105 | 262 | |||
48 | 70 | 175 | |||||
19 | 45 | 35 | 105 | 282 | |||
51 | 70 | 175 | |||||
22 | 48 | 35 | 105 | 322 | |||
Rotary Vibrator Drilling Hose
Rotary Drilling Hose
Tube: NBR, specially compounded for handling abrasive, corrosive and oily drilling mud
Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables.
Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather.
Application: Flexible Connection between standpipe and swivel(Rotary Drilling) or between pump and standpipe(Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work.
Fitting: Hammer Unions, API Male End, Flanges
ID (inches) | OD (inches) | MBR (inches) | Straight Ends (inches) | Grade | Working Pressure (PSI) | Test Pressure (PSI) | Weight (lbs/ft) | Coupling Weight (lbs) | |
Armored | Unarmored | ||||||||
2 | 4.6 | 36 | 36 | C | 4,000 | 8,000 | 20 | 16 | 65 |
4.6 | 36 | 40 | D | 5,000 | 10,000 | 20 | 16 | 65 | |
4.8 | 36 | 42 | E | 7,500 | 15,000 | 22 | 19 | 75 | |
2-1/2 | 4.8 | 36 | 36 | C | 4,000 | 8,000 | 23 | 18 | 67 |
4.8 | 36 | 40 | D | 5,000 | 10,000 | 23 | 18 | 67 | |
4.9 | 36 | 42 | E | 7,500 | 15,000 | 24 | 19 | 77 | |
3 | 5.7 | 36 | 36 | C | 4,000 | 8,000 | 25 | 20 | 81 |
5.7 | 36 | 40 | D | 5,000 | 10,000 | 25 | 20 | 81 | |
6.4 | 36 | 42 | E | 7,500 | 15,000 | 36 | 31 | 136 | |
3-1/2 | 6.2 | 36 | 36 | C | 4,000 | 8,000 | 28 | 23 | 90 |
6.2 | 36 | 40 | D | 5,000 | 10,000 | 28 | 23 | 90 | |
6.9 | 36 | 42 | E | 7,500 | 15,000 | 41 | 35 | 105 | |
4 | 6.7 | 36 | 36 | C | 4,000 | 8,000 | 33 | 28 | 104 |
6.7 | 36 | 40 | D | 5,000 | 10,000 | 33 | 28 | 104 | |
7.4 | 36 | 42 | E | 7,500 | 15,000 | 49 | 42 | 117 | |
5 | 8.4 | 48 | 38 | C | 4,000 | 8,000 | 53 | 44 | 200 |
8.4 | 48 | 42 | D | 5,000 | 10,000 | 53 | 44 | 200 | |
8.9 | 48 | 44 | E | 7,500 | 15,000 | 71 | 62 | 240 | |
6 | 9.4 | 48 | 38 | C | 4,000 | 8,000 | 71 | 62 | 302 |
9.4 | 48 | 42 | D | 5,000 | 10,000 | 71 | 62 | 302 | |
9.9 | 48 | 44 | E | 7,500 | 15,000 | 92 | 83 | 324 | |